Welcome to GolfCartCoversPlus.com
417-847-2278

DOORWORKS™ FOUR PASSENGER CART ROOF INFORMATION

Most 2 passenger golf carts can be converted to 4 passenger carts by removing the golf bag straps and replacing them with a "flip seat." Then, an extended roof top replaces the standard top and a 4 passenger cart is created. There are lots of roofs and as many "flip seat" kits in the after market. The DoorWorks™ enclosure for these types of conversions uses ONE type of extended roof. That roof is described on this page. If you have any further questions, please call.

RETURNS / EXCHANGES: PLEASE MAKE SURE YOU ORDER THE CORRECT ENCLOSURE FOR YOUR GOLF CART. IF YOU ORDER THE WRONG ENCLOSURE, WE WILL REPLACE IT - BUT YOU WILL BE CHARGED FOR THE FREIGHT FOR THE RETURN AND THE CORRECT ENCLOSURE (29.00 each way). IF YOU ARE UNCERTAIN OF YOUR CART MODEL, PLEASE CONTACT US.

REQUIRED ROOF DETAILS FOR 2 PASSENGER TO 4 PASSENGER CONVERSION ENCLOSURES

This enclosure is to be used with a standard 80 inch roof. It specifically requires the kind of roof that has a 1 inch aluminum band that goes all the way around the bottom of the roof and on the inside of that band is a channel. (See photos below)

The channel is used to eliminate the need for drilling holes in the roof - AND - more importantly - it gives the installer flexibility in that the roof can be easily adjusted frontward or backward to make a nice fit for the enclosure.

 

This photo shows the roof that is required for this installation.

Note the aluminum band that goes all the way around the bottom of the roof.

The aluminum band has a hollow channel. T Bolts are placed inside this channel. The header system is then bolted to these T Bolts. Fabric is also attached with the T Bolts.

The photo above shows a T Bolt added to the channel in the roof, then our Header L Bracket added to the T Bolt. The Header Bar is then bolted to the Header L Bracket.

Notice now that the T Bolt could be moved along the slot (before it is tightened) which allows the frame to be adjusted without the need for drilling holes in the roof.

WE SELL THE ROOF NEEDED FOR THIS ENCLOSURE. PLEASE CALL 417.847.2278.
NOTE: All support for this enclosure is made through the factory.